***********************************************************************

	WINDOWS NT DRIVER SETUP INFORMATION For Blade 3D 9880


***********************************************************************
Windows NT Device Drivers (6.50.5452-95icd)                 July 4, 2000
***********************************************************************

Contents

1.0     Introduction
2.0     Installation Notes for Windows 9x 

*****************************

1.0     Introduction

This Accelerated Driver runs on the following products:

     Trident Blade 3D PCI/AGP local bus adapter

The Graphics Device Drivers supplied here are for the Microsoft
Windows 95 and 98 operating system.

*****************************

2.0     Installation Notes for Windows 9x

Procedure:

1. Run the Windows 9x display Setup program located in the Control Panel,
   Select Display Icon.  Double click it to bring up Display Property page.
   Select "Settings" Tab on the Display Property page.

2. Click "Display Type or advanced..." button from the Display Settings options.

3. Click "adaptor" tab from Trident Properties

4. Cick next and select "Display a list of all the driver......"

5. Select "Change..." button from the Display Type options.

5. Select "Have Disk..." button from the Select Device options.

6. Windows 9x will prompt you for the correct path where the driver is saved.

7. Restart Windows 9x.  Windows 9x will start up with default mode 
   using the Trident drivers.

8. Choose desired resolution, color depth and refresh rate from the
   Display Setting applet, and restart Windows 9x.